RC frames

 

+ Filter

List of publications

T. Albanesi, S. Biondi, E. Candigliota, A. LeMaoult, C. Nuti
Farhad Akhoundi, Graça Vasconcelos, Paulo Lourenço
Anténio Arêde, André Furtado, José Melo, Hugo Rodrigues, Humberto Varum, Nuno Pinto
Maria Teresa De Risi, Mariano Di Domenico, Paolo Ricci, Gerardo Mario Verderame, Gaetano Manfredi
André Furtado, Hugo Rodrigues, António Arêde, Humberto Varum
Ibrahim Serkan Misir, Ozgur Ozcelik, Sadik Can Girgin, Umut Yucel
Manuel Fernando Paulo Pereira, MF Pereira, JE Ferreira, Paulo B Lourenço

Publication: Experimental evaluation of out-of-plane capacity of masonry infill walls (2016)

Author(s):

André Furtado, Hugo Rodrigues, António Arêde, Humberto Varum

Reference:

Procedia Engineering

Preparation and upload by:

Filip Anic, Faculty of Civil Engineering and Architecture Osijek, Josip Juraj Strossmayer University of Osijek

Publication type:

Article

Downloads:

Publication abstract (click to enlarge):

This paper reports an experimental campaign carried out at the LESE at the Faculty of Engineering of the University of Porto in order to study the out-of-plane behaviour of IM walls, and the influence of the previous in-plane drift in their out-of-plane response. For this, three full-scale infill panels were constructed and were subjected to out-of-plane monotonic and cyclic loading, with and w

Test setup: Out of plane response

Test setup type:

RC frame

Parameter:

Storey count:
1

Diagram (scan):

Diagram (data):

Experiment: Inf_01 (monotonic)

Diagram (data):

Experiment type:

Experimental time-history

Source:

This publication

Parameter:

Concrete strength:
Steel strength:
Masonry strength:
0.53 MPa
Concrete young modulus:
24300 MPa
Steel young modulus:
Masonry young modulus:
942 MPa
Area moment of inertia:

Curve:

X values:
Y values:

 

ERASMUS+ Key Action 2 – Strategic Partnerships
“Forecast Engineering: From Past Design to Future Decisions”

The creation of these resources has been funded by the ERASMUS+ grant program of the European Union under grant no. 2016-1-DE01-KA203-002905. Neither the European Commission nor the project‘s national funding agency DAAD are responsible for the content or liable for any losses or damage resulting of the use of these resources.